![]() ![]() It takes a little getting used to at first because the material doesn’t flow too well when it’s this thick, and working around these rails is a bit of a trick. And, in this small space, we’re using a wooden float to spread it, instead of a squeegee.īrad: I’ve never done this before, so don’t be too critical. We’re mixing the resurfacer a bit thicker than normal because we have vertical surfaces to cover. Dang, this thing is big enough to do a 55-gallon drum with it! So what, you want to mix, you’ve got the mixer here?īrad: Yeah, the paddle bit’s already on it.ĭanny: You pour, I’ll do this hard part. ![]() resurfacing it is gonna sort of blend it all together.ĭanny: All right, okay. It looks a lot better, but you can still see that it’s very discolored, so that’s gonna be. And that helped a lot to sturdy it up some. And you were able to kind of support all of these, but that always, someone comes down and breaks it out like that, it seems like.īrad: Right, most of these, most of these posts were sort of dug out, you know erosion over the years. We’re about to correct that.ĭanny: Pretty good job on all of these, all of these corners. The acrylic fortifier improves bonding to existing surfaces, so this repair will last.Īs it hardens, he’s able to work it more and more to get exactly the shape he needs, so that when the forms come off, the color is the only indication that there was ever a repair. This mix is stiff, so it can be sculpted as it goes in. Then everything was cleaned to remove the dirt, debris, and dust. For some of the larger voids, he even had to create forms to support the repair material which, in this case, is a quick setting cement mixed with an acrylic fortifier. The first step was roughing up all the surfaces with a chisel and a wire brush to give the repair material a good surface to grab onto. Brad is the director of photography for our show, so he grabbed a copy of the Quikrete Guide to Concrete from our library and did some homework on this kind of repair. But he’s well underway with a project to make his stairs look a heck of a lot better, and be a lot safer.īefore he started, the concrete caps around these brick stairs were cracked, chipped around the edges, and even the landing at the top was missing large chunks of concrete. It’s a 75-year-old house, plenty of little projects around here to do. Now, this house is owned by a friend of mine, Brad, who bought it recently. We’ve already looked at concrete driveways, asphalt driveways, but there’s another surface that a lot of homeowners have challenges with, and that’s concrete steps. Lighted Magnifying Glass That Stays Putĭanny Lipford: This week we’re looking at a number of repairs that you may be facing on the outside of your home.Best Lawn Care Service for Service Dogs.Make sure you apply a thick layer and all the paint is thoroughly covered. These mixtures are highly toxic and can cause some severe reactions if inhaled or placed directly onto the skin. For best results, use a paintbrush and not a roller, as rollers can cause the mixture to splash back onto your skin. ![]() Step 4 - ApplyĬover an area that can be completed before the mixture dries out. Once you have an idea of how long it takes to remove the paint, you can begin work on a larger area. It will also help determine the length of time you need for the mixture to work effectively. ![]() This will establish if the combination you have purchased is suitable for the job. Step 3 - TestĪpply some of the remover to a small area on the wall. If you are using an airless sprayer, pour the liquid directly inside. Next, simply pour the substance into a paint tray. Purchase a concrete paint stripper or sealant remover from a hardware or a DIY store. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |